Monday, March 10, 2008

No strings (or wires) attached

Could wireless electric lamps and other small appliances be in our future? Researchers at the Massachusetts Institute of Technology think that transmitting power without wires is not only possible but within reach.

Resonant coupling sounds like it might be a new Internet match-making service, but it's actually the concept that may prove to be the key to transmitting power wirelessly. (GW)

TR10: Wireless Power

Physicist Marin Soljacic is working toward a world of wireless electricity.

By Jennifer Chu
MIT Technology Review
March/April 2008

In the late 19th century, the realization that electricity could be coaxed to light up a bulb prompted a mad dash to determine the best way to distribute it. At the head of the pack was inventor Nikola Tesla, who had a grand scheme to beam elec­tricity around the world. Having difficulty imagining a vast infrastructure of wires extending into every city, building, and room, Tesla figured that wireless was the way to go. He drew up plans for a tower, about 57 meters tall, that he claimed would transmit power to points kilometers away, and even started to build one on Long Island. Though his team did some tests, funding ran out before the tower was completed. The promise of airborne power faded rapidly as the industrial world proved willing to wire up.

Then, a few years ago, Marin Soljačić, an assistant professor of physics at MIT, was dragged out of bed by the insistent beeping of a cell phone. "This one didn't want to stop until you plugged it in for charging," says Soljačić. In his exhausted state, he wished the phone would just begin charging itself as soon as it was brought into the house.

So Soljačić started searching for ways to transmit power wirelessly. Instead of pursuing a long-distance scheme like Tesla's, he decided to look for midrange power transmission methods that could charge--or even power--portabl­e devices such as cell phones, PDAs, and laptops. He considered using radio waves, which effectively send information through the air, but found that most of their energy would be lost in space. More-targeted methods like lasers require a clear line of sight--and could have harmful effects on anything in their way. So Soljačić sought a method that was both efficient--able to directly power receivers without dissipating energy to the surrounding­s--and safe.

He eventually landed on the phenome­non of resonant coupling, in which two objects tuned to the same frequency exchange energy strongly but interact only weakly with other objects. A classic example is a set of wine glasses, each filled to a different level so that it vibrates at a different sound frequency. If a singer hits a pitch that matches the frequency of one glass, the glass might absorb so much acoustic energy that it will shatter; the other glasses remain unaffected.

Soljačić found magnetic resonance a promising means of electricity transfer because magnetic fields travel freely through air yet have little effect on the environment or, at the appropriate frequencies, on living beings. Working with MIT physics professors John Joannopoulos and Peter Fisher and three students, he devised a simple setup that wirelessly powered a 60-watt light bulb.

The researchers built two resonant copper coils and hung them from the ceiling, about two meters apart. When they plugged one coil into the wall, alternating current flowed through it, creating a magnetic field. The second coil, tuned to the same frequency and hooked to a light bulb, reso­nated with the magnetic field, generating an electric current that lit up the bulb--even with a thin wall between the coils.

So far, the most effective setup consists of 60-centimeter copper coils and a 10-megahertz magnetic field; this transfers power over a distance of two meters with about 50 percent efficiency. The team is looking at silver and other materials to decrease coil size and boost efficiency. "While ideally it would be nice to have efficiencies at 100 percent, realistically, 70 to 80 percent could be possible for a typical application," says Soljačić.

Wireless Light
Marin Soljačić and colleagues used magnetic resonance coupling to power a 60-watt light bulb. Tuned to the same frequency, two 60-centimeter copper coils can transmit electricity over a distance of two meters, through the air and around an obstacle.

1. Resonant copper coil attached to frequency converter and plugged into outlet
2. Wall outlet
3. Obstacle
4. Resonant copper coil attached to light bulb

Credit: Bryan Christie Design

Other means of recharging batteries without cords are emerging. Startups such as Powercast, Fulton Innovation, and WildCharge have begun marketing adapters and pads that allow consumers to wirelessly recharge cell phones, MP3 players, and other devices at home or, in some cases, in the car. But Soljačić's technique differs from these approaches in that it might one day enable devices to recharge automatically, without the use of pads, whenever they come within range of a wireless transmitter.

The MIT work has attracted the attention of consumer-electronics companies and the auto industry. The U.S. Department of Defense, which is funding the research, hopes it will also give soldiers a way to automatically recharge batteries. However, Soljačić remains tight-lipped about possible industry collaborations.

"In today's battery-operated world, there are so many potential applications where this might be useful," he says. "It's a powerful concept."

0 Comments:

Post a Comment

<< Home